How to fix threads – RECOIL® Insert Installation Tools

DRILL:

Drill to clear out the damaged thread with drill size as specified on kit (if necessary).

CHECK:

Ensure tap thread matches bolt.

TAP HOLE:

Place tap into tap wrench or use the squaredrive in the installation tool provided*.

Tap hole to the required depth using correct procedures (if unsure contact your dealer).

SET TOOL:

Place insert on installation tool, positioning the adjustable top so that the insert tang is centred in the tang slot.

INSTALL:

Wind insert in with light downward pressure until 1/4 to 1/2 turn below the surface.

TANG REMOVAL:

Do not attempt to twist tang off with tool. Lift tool from tang, turn tool 90° and tap down sharply. Use tang break-off tool where supplied.

For spark plug and large fine thread inserts, use long nose pliers to pull tang out.

Thread Repair Kits

Everything you need for complete thread repair in one handy case. Trade Series Kits include only the best quality

HSS taps which make them suitable for aluminium, magnesium, cast iron and most machinable steels.

Contents:

■ HSS Drill Bit*

■ HSS Intermediate STI Tap

■ Thread Inserts

■ Installation Tool

■ Magnetic Tang Removal Tool*

■ Installation instructions